Engineered Wood Fiber (HydraFiber / Airlite) Delivery in Palm Beach & Broward County
Processed wood fiber components that add air porosity and volume to container mixes while reducing peat use.
Engineered wood fiber gives a mix structure and air space at a lower cost and lower environmental footprint than peat alone. Growers running big volume use it to hold performance while trimming input cost. Because it changes how the mix waters, we blend it to your ratio rather than swapping it in blindly.
What it's used for
- Air porosity in container media
- Reducing peat in a blend
- High-volume nursery production
How it's sold
Blended into your bulk mix
We also remove it
Spent media and production waste get hauled off on the same trip.
Delivered — and Spread, If You Want
Order engineered wood fiber (hydrafiber / airlite) as a placed pile, or have our crew rake, wheelbarrow and grade it out to the depth you need on the same visit.
Delivered and spread the same visit
Order the material with spreading and one crew handles both. We place the load close to the work, then wheelbarrow and rake it out to an even depth — mulch in beds, rock in borders and drainage runs, soil across low spots, sand under pavers.
Rough grade, level, and finish
For soil, fill dirt, and base material we rake to grade, knock down high spots, and slope away from the structure so water runs off instead of pooling. Tell us the finished depth you want and we hit it.
Bed prep and edging
Old mulch or faded rock scraped out first, weed fabric down if you want it, fresh material spread to depth, and edges cut clean against turf and walkways. The old material leaves on our trailer the same trip.
Hand work where machines don't fit
Screened patios, pool decks, courtyards, tight side yards, and second-story planters all get done by hand. No lawn ruts, no torn-up gate posts.
Spreading is priced as an add-on to the delivered material — usually quoted by the yard or by the bed area, flat rate, before we load. Text the square footage and depth and you'll have the number in minutes.
Delivery & Spreading FAQ
Do you spread engineered wood fiber (hydrafiber / airlite) after delivery?
Yes. We can deliver engineered wood fiber (hydrafiber / airlite) as a placed pile, or rake and spread it out to an even depth as part of the same visit. Spreading is quoted as a flat add-on to the delivered price.
How is engineered wood fiber (hydrafiber / airlite) sold and delivered?
Blended into your bulk mix. We quote material plus delivery as one flat number at today's rate, so there are no surprises at the gate.
How much engineered wood fiber (hydrafiber / airlite) do I need?
One cubic yard covers roughly 100 square feet at 3 inches deep, 160 square feet at 2 inches, or 320 square feet at 1 inch. Text us your area dimensions and target depth and we'll do the math for you.
Can you haul away the old material first?
Spent media and production waste get hauled off on the same trip. Combining the haul-off with the delivery on one trip is almost always cheaper than booking two jobs.
Where do you deliver engineered wood fiber (hydrafiber / airlite)?
Every city in Palm Beach County and Broward County, seven days a week. Same-day delivery is often available when it fits the route.
How do I order?
Call or text (561) 345-9808 with the material, quantity, and address. Add a photo of the drop area if access is tight and we'll confirm the trailer fits before we roll.